Design Futures

Today in class we were shown how to solder the switch and wires onto the LED lights that we had to measure and cut to size. We had to make sure that we cut the right amount as if you have too many it could be too bright and not enough may not work well. To do this we had to solder the wires the right way onto the LED lights but before you had to feed the wires through the hole in the wood but for me the aluminium. Then we had to melt this peice of rubber around the wires to secure them. After this I then stuck the lights onto the lamp and checked it worked!!! next lesson we will be cuting the white plastic to cover the wires then the lamp will be near to finished.

• 
• 
• 
• 
•